Sonos is a wireless audio company that makes solid – albeit comparatively expensive – audio hardware. Setup is drop dead simple – to add a component you simply press one or two buttons on the new device and everything “just works” and the remote control UI, refined over most of the past decade, has a cult-like following. You can create different audio zones around your room and play different music in each one or enter party mode and turn your house into a massive disco. In short, Sonos makes whole-home audio easy.
So what of this new Playbar, a long sound bar that sits above or below your television and connects to your system via a single optical cable? This new device has nine speakers built-in, six midrange and three tweeters, and works with Sonos’ SUB subwoofer and Play:3 mini speakers that can act as satellite surround sound speakers.
To use the Playbar you need at least a Sonos Bridge – the central device that talks to all Sonos devices – and an iOS or Android device. Setup requires you to connect the Playbar to your TV (or receiver) via a single optical cable. You then plug in the power and you’re set. It also has an Ethernet port, but Sonos has excellent QOS control via wireless and I’ve never had a problem with streaming.
The $ 699 Playbar can be mounted above or below your TV – a built-in accelerometer senses the direction – or you can put it on a TV stand.
Unfortunately, this reliance on a single optical cable is both good and bad. If you don’t have a receiver and connect all of your devices directly to your TV, you’re golden. If you have a receiver, however, setup is a bit more difficult. I set my receiver to output HDMI audio as well as video and turned it down all the way. The TV, then, does all of the audio output via optical and your receiver becomes little more than a switch. You can control the Playbar’s volume with your TV remote or the Sonos app.
The app also bears some discussion. The Sonos app breaks your sound system into different rooms and nearly everything is managed through the app, including the addition of more speakers to the system. You can add music services and grab multiple songs from multiple services – an album from your own collection, a few songs from a shared drive on your network, and maybe a playlist from Rdio – and play it as a queue. You can save queues (playlists, really) and all of the audio manipulation, including control of bass and treble, are done in the app. With the addition of the the Playbar, the app adds a “TV” input that allows you to control the volume of the Playbar remotely.
How is the audio quality? A single Playbar will make your TV sound better (although that’s usually not hard). I was able to turn up the sound on action movies and get a few solid whomps out of the soundtrack as well as hear clear and distinct dialog, which was actually an improvement over my current 5.1 setup. Your results may vary, but I didn’t get much out of the “simulated” surround sound these speakers advertised but I was pleased with the sound overall.
Music playback over this speaker – because, using the Sonos app, you can beam services like Pandora and Rdio as well as your own collection through the Playbar – was clean and nuanced and these were an excellent replacement for the pair of stereo speakers I usually used to listen to music.
Current Sonos users will be pleased to note that this system does replace the Play:5 or Play:3 speakers, whether you have paired them in stereo or are simply using a single unit. You could, for example, remove a pair of Play speakers and simply use this to play TV audio as well as your music. The Playbar is that good. I saw no discernible difference in using this vs. the two Sonos speakers I already had in the room I was testing this gear in.
The Playbar also answers another home audio prayer – the promise of true wireless 5.1 sound. While the Playbar technically isn’t a center-front right-front left setup, by pairing this with two Play:3 satellites (Play:5 units don’t work) and a sub-woofer, you’ve got a very nice wireless 5.1 system.
The Playbar really shines in this setup, which, in the end, will cost you $ 1,996 to set up, including the Playbar. The Playbar paired with the sub-woofer, for example, really opens up the audio considerably while the satellite speakers – which require all of five minutes to setup – are almost magical in their simplicity. For folks who have pulled wire under or across walls and floors, this setup is a godsend. At the bare minimum I’d recommend the Playbar and the Sub. If you want to spring for the Play:3s in the back, you won’t be disappointed.
Better (or at least more bass-heavy) soundbars can be had for about as much as the Sonos system. However, if you’re already familiar with the Sonos system, this is probably your best bet. It completely replaces any Play speakers you already have (allowing you to stick them in another room) and paired with other Sonos gear it really sounds great.
If you’re new to Sonos, you may not want to start here. Sonos truly shines in music playback and there’s nothing like setting all of your speakers on party mode and creating a soundscape that would normally take you hours of setup and wire management to pull off. The Playbar, then, seems like a device for folks who want to Sonosify their whole home and it’s understandable why they created it. However, it’s not a good introductory device unless you’re in the market for a solid sound bar with a few very cool features. If you’re only looking for music playback, a few Play:5 speakers and maybe a SUB are a good place to start.
Can you get better sound out of equally or more expensive speakers? Potentially. However, the added value of complete control of your music and TV audio is a huge plus. The Sonos system shines when there are a few speakers going at once and if you’re looking for a true wireless surround sound system, look no further. If you’re simply trying to replace the wonky speakers built into your TV, however, the Playbar faces tougher competition but stands firm against similarly-priced soundbars. It is well worth a look when considering living room/TV audio systems.
2 DOF Slope Pan & Tilt Kit + 2 Servos Round Horn Mount Robot Arduino - SEE VIDEO
$11.99 (0 Bids)End Date: Thursday May-23-2013 5:03:06 PDTBid now | Add to watch list
NEW VEX Robotics Design System Transmitter and Receiver Kit - with torn box.
$39.99End Date: Sunday Jun-2-2013 5:38:52 PDTBuy It Now for only: $39.99Buy It Now | Add to watch list
WIRELESS RC SPIDER ROBOT #18144 ACADEMY SCIENCE MODEL KIT w/IR REMOTE CONTROLLER
$47.00End Date: Friday May-24-2013 14:41:20 PDTBuy It Now for only: $47.00Buy It Now | Add to watch list
For those not in the know, the forthcoming 802.11ac standard is so fast that it makes Speedy Gonzales look like, well, Regular Gonzales. Amped Wireless is launching a flotilla of new WiFi units capable of taking advantage of that additional power that’ll cover your house in the company’s trademark 10,000 square feet of wireless internet. The RTA 15 is the company’s latest flagship dual-band router, the REA 20 range extender will double your wireless footprint and the ACA 1 connects to your laptop’s USB 3.0 port, helping you stay connected in areas of weak signal. The trio will be available at the start of 2013, so we’ll probably get our first peek at the new gear at CES.
Continue reading Amped Wireless announces a new range of 802.11ac high-powered WiFi routers
Filed under: Wireless, Networking
Related Posts: 
Seattle may have lost its high-velocity hoops team, but that doesn’t mean it’s satisfied with anything but speedy internet. The city has come to an agreement with Gigabit Squared (GB2) to build an unnecessarily wordy “fiber-to-the-home/fiber-to-the-business broadband network.” With the University of Washington taking care of “community leadership” (as part of the Gig. U initiative), GB2 plans to utilize Seattle‘s excess fiber infrastructure, and create more, to deliver new internet options in three ways. In addition to the wired fiber network, the Gigabit Seattle project sees the development of a “dedicated gigabit broadband wireless umbrella” for beaming up to 1 Gbps from radio transmitters to others in direct view, as well as municipal WiFi-like services.
At this stage, only 12 “demonstration” areas are earmarked in the proposal, although the radio-based wireless “umbrella” has the potential to extend that coverage. Gigabit Squared now needs to find the cash to get going if it wants to meet the distant operational target of “year-end 2014.” It’s worth remembering that plenty of city-wide internet initiatives have failed before this one, and only a Memorandum of Understanding and a Letter of Intent have been signed by all the involved parties — agreements which aren’t necessarily binding. Full details of the plan are available in PR form and at the source link below, or if you’re done with prose, a map of the 12 demo neighborhoods hopefully getting hooked up can be found after the break.
[Thanks, Gavin]
Filed under: Wireless, Internet
Source: Gigabit Seattle
Related Posts:
Samsung Galaxy Note 2 Amazing Wireless Charging
Related Posts: MOTOROLA XOOM MZ602 32GB, WI-FI + 4G VERIZON ONLY 10.1IN - BLACK 10.1" TABLET
$227.95End Date: Thursday May-23-2013 14:57:38 PDTBuy It Now for only: $227.95Buy It Now | Add to watch list
Motorola XOOM 10.1in 32GB HDD 12302453
$125.00 (1 Bid)End Date: Thursday May-23-2013 9:01:43 PDTBid now | Add to watch list
Motorola XOOM MZ602 32GB, Wi-Fi + 4G (Verizon), 10.1in - Black
$189.99End Date: Friday May-31-2013 0:13:57 PDTBuy It Now for only: $189.99Buy It Now | Add to watch list
MOTOROLA XOOM MZ602 32GB, WI-FI + 4G VERIZON ONLY 10.1IN - BLACK 10.1" TABLET
$227.95End Date: Thursday May-23-2013 14:57:38 PDTBuy It Now for only: $227.95Buy It Now | Add to watch list
Motorola XOOM 10.1in 32GB HDD 12302453
$125.00 (1 Bid)End Date: Thursday May-23-2013 9:01:43 PDTBid now | Add to watch list
Motorola XOOM MZ602 32GB, Wi-Fi + 4G (Verizon), 10.1in - Black
$189.99End Date: Friday May-31-2013 0:13:57 PDTBuy It Now for only: $189.99Buy It Now | Add to watch list
Click on this link to order on Amazon – amzn.to ……………………………………………………… ……………………………………………………… ……………………………………………………… PU LEATHER FOLIO CASE for AMAZON KINDLE FIRE – RED WITH FLORAL INTERIOR + QUBITS MICROFIBRE CLEANING CLOTH “Kindle Fire HD 7″” Case Semi EVA Hard Nylon Finish Bag / Loose Fit with Tablet Stylus Pen Included + EnvyDeal Velcro Cord Tie (Black)” Premium Rubberized Snap-on Hard Crystal Front and Rear Case Cover for Apple iPod Touch 4G, 4th Generation, 4th Gen – white compatible with 8GB / 32GB / 64GB Apple iPod shuffle 1 GB Silver (2nd Generation) OLD MODEL Charge and Audio Extension Cable for Cars and Speaker Docks Fits Apple iPod / iPhone-White 4 Feet Monster MON129363 FM-CH iPod/iPhone iCarPlay Wireless 800 FM Transmitter – Deluxe Car Kit – Retail Packaging – Black Cimo Smart Cover Companion Compatible TPU Case for Apple iPad 2 (Grey) Stand with Mini Tripod Mount Adapter for iPhone 4G (Black) 3.1A Dual USB Car Charger Adapter for iPad iPad2 iPhone iPod (White) Purple Lily Hard Case Cover for Samsung Galaxy Precedent M828C BCI-6Y Ink Tank, Yellow White Silicone Gameboy Case + Random Color Pouch for Ipod Touch 4
Related Posts:
A new patent application uncovered by AppleInsider today shows that Apple is working on ways to make hybrid headphones that work via both Bluetooth and a wired connection, and can switch seamlessly between the two. It’s a system designed to come in handy during physical activity, complete with the ability to recharge directly from the attached device.
The patent describes headphones connected to a device via a two-part, detachable cable that holds together either via a simple clip or magnets, much like the MagSafe power adapter. The connection could then easily disconnect if a user accidentally knocks it or the cord becomes entangled, avoiding potential injury or product damage. If you’ve ever tripped on your Mac’s MagSafe adapter, you’ll notice that most likely, neither you nor your computer came crashing to the ground.
Upon being disconnected from an attached device physically, these headphones would stop drawing power and instantly power on a wireless radio to broadcast to the host device, over Bluetooth or some other type of connection.
It’s a neat trick, and one that would definitely help Apple gain even more cred when it comes to its headphone offerings. The new Apple EarPods were a good start, but something like this could actually elevate their headphones to something more than just an adequate sound delivery device that comes in the same box as iPhones and iPods – it could make headphones an actual selling point. Still, this would add considerably to Apple earphones’ cost of manufacture, so it’s probably something that, were it ever to arrive, would ship separately like the In-Ear Headphones Apple currently sells.
Of course, patents aren’t product road maps, but Apple is offering Bluetooth 4.0 across their device lineup now, which supports low-power accessories, and Bluetooth sound has come a long way from where it once was. My Jaybird Freedom headset is one of the best-sounding earbuds I’ve ever owned, so these could possibly make an appearance at some future date, if Apple thinks they’d actually address a major pain point for users of its mobile devices.
$227.95End Date: Thursday May-23-2013 14:57:38 PDTBuy It Now for only: $227.95Buy It Now | Add to watch list
Motorola XOOM MZ602 32GB, Wi-Fi + 4G (Verizon), 10.1in - Black
$189.99End Date: Friday May-31-2013 0:13:57 PDTBuy It Now for only: $189.99Buy It Now | Add to watch list
Related Posts:
